165/70R13 vs 165/65R14: Tyre Size Comparison, Diameter Difference & Speedometer Effect
165/70R13 and 165/65R14 look like near neighbours on paper, but the numbers tell a more precise story. 165/65R14 is the taller tyre: its diameter is 570.1 mm against 561.2 mm, +8.9 mm (+1.6%) larger. Width moves +0 mm, sidewall height moves -8.3 mm, and the circumference changes by +27.9 mm, which is what the speedometer feels. This comparison works through the side-by-side measurements, the speedometer error at 30, 50 and 70 mph in both directions, and the practical effects on ride comfort, grip and wheel-arch clearance.
On this page, 165/70r13 vs 165/65r14 is the case in point: Before the tables, keep the context straight. These are nominal new-tyre dimensions, computed from the size codes: real tyres vary slightly by brand, model, wear and inflation pressure. A +1.6% difference is within the plus-or-minus 3% guideline that is commonly used for speedometer accuracy, and the speedometer tables below show exactly what that percentage means at real road speeds. The rest of the page covers sidewall, grip, gearing and the clearance checks that decide whether the larger size can physically fit.
This is a calculation, not a safety approval. Always check your vehicle's door-jamb placard, load index and speed rating, and confirm fitment with a tyre professional before fitting a different tyre size.
165/70R13 vs 165/65R14 side by side
| Measurement | 165/70R13 | 165/65R14 | Difference |
|---|---|---|---|
| Overall diameter | 561.2 mm (22.1 in) | 570.1 mm (22.4 in) | +8.9 mm (+1.6%) |
| Sidewall height | 115.5 mm | 107.2 mm | -8.3 mm |
| Circumference | 1763.1 mm | 1791.0 mm | +27.9 mm |
| Revolutions per mile | 912.8 | 898.6 | -14.2 |
| Section width | 165 mm | 165 mm | +0 mm |
| Rim diameter | 13 in | 14 in | +1 in |
Diameter difference between 165/70R13 and 165/65R14: +8.9 mm (+1.6%)
The diameter gap of +8.9 mm (+1.6%) is the number to carry away from this section. It is inside the plus-or-minus 3% guideline, and it shows up directly in the speedometer tables below. The circumference difference of +27.9 mm and the revs-per-mile difference of -14.2 are the same change expressed differently — the first is what the road sees, the second is what the car's sensors count. Neither is a safety judgement on its own; both are inputs to the fitment checks further down the page.
Speedometer error: 165/70R13 to 165/65R14 and back
The maths is a single ratio. 165/65R14 over 165/70R13 is 1.016, so every indicated speed after the swap is multiplied by that number to get the true speed: 30 becomes 30.5, 50 becomes 50.8 and 70 becomes 71.1 mph. In the reverse direction the ratio is 0.984, so 70 mph indicated is 68.9 mph in reality. The table below shows both directions at all three speeds, so you can check whichever direction applies to your car without doing the arithmetic yourself.
| Indicated speed | Actual speed fitting 165/65R14 (from 165/70R13) | Actual speed fitting 165/70R13 (from 165/65R14) |
|---|---|---|
| 30 mph | 30.5 mph | 29.5 mph |
| 50 mph | 50.8 mph | 49.2 mph |
| 70 mph | 71.1 mph | 68.9 mph |
Sidewall height and ride comfort: 165/70R13 vs 165/65R14
The sidewall is where the ride difference lives. 165/70R13 has 115.5 mm of sidewall and 165/65R14 has 107.2 mm, a change of -8.3 mm. Less sidewall generally means sharper steering response and less cushioning, so more of the road surface reaches the cabin. The aspect ratios tell the same story in percentage terms: 70% for 165/70R13 against 65% for 165/65R14. Sidewall height also affects vulnerability to kerb damage — a shorter sidewall leaves less rubber between the rim and the road.
Width, grip and fuel use: 165/70R13 vs 165/65R14
On width, the two sizes are 0 mm apart. The width is the same, so neither size has a contact-patch advantage over the other. Both are 165 mm wide, so the difference here is the aspect ratio (70% vs 65%) and the rim (13 in vs 14 in). Do not expect a dramatic change in fuel use from a width change of this size; the bigger influences on fuel use are the tyre compound, the pressure and the way the car is driven.
Revolutions per mile and gearing: 165/70R13 vs 165/65R14
The revs-per-mile figures (912.8 for 165/70R13, 898.6 for 165/65R14) describe the gearing effect. 165/65R14 turns -14.2 fewer times per mile, so at any given road speed the engine turns slightly slower with 165/65R14 fitted — the gearing is effectively longer. That can make cruising a touch more relaxed and can trim fuel use slightly, but it also means slightly less acceleration from the same throttle opening, because each gear is effectively taller. The change is 1.6% either way, so the effect on everyday driving is subtle rather than transformative.
Will 165/65R14 clear after 165/70R13? What to check before fitting
Whether 165/65R14 physically fits is a question for your car, not for this table. The numbers say it is taller by 8.9 mm and 0 mm the same width, and those are the dimensions that decide clearance — but the actual gaps depend on your arches, suspension and steering geometry. Check at full lock both ways, check with the suspension compressed, and check with the car loaded. Check the placard for the load index and speed rating, and check the rim width for a 165 mm tyre. A tyre professional can confirm all of it in one visit, and that confirmation is the step that turns a comparison into a fitment.
Which size suits which priority: 165/70R13 or 165/65R14
Choose on the basis of what matters to you, not on the headline alone. If ride comfort matters most, the sidewall change of -8.3 mm is the figure to weigh. If grip matters most, the width change of +0 mm is the one to weigh. If keeping the instruments accurate matters most, the diameter change of +1.6% is the one to weigh — and if it is outside the plus-or-minus 3% guideline, ask about recalibration. And if the answer to the clearance check is uncertain, that outranks all three: a tyre that rubs is not a viable option at any percentage.
Related 165/70R13 vs 165/65R14 comparisons and tools
- 165/70R13 tyre size
- 165/65R14 tyre size
- 145/80r13 vs 165/70r13
- 165/70r13 vs 175/65r13
- 165/70r13 vs 185/60r13 tyre size comparison
- Use the Tyre Size Comparison tool to compare 165/70R13 with 165/65R14 and any other pair.
- Use the Plus Sizing Calculator to find a wider size than 165/70R13 that keeps the diameter close to 165/70R13.
Frequently asked questions
What is the diameter difference between 165/70R13 and 165/65R14?
165/65R14 is +8.9 mm (+1.6%) larger in diameter than 165/70R13: 570.1 mm against 561.2 mm. That is inside the commonly used plus-or-minus 3% guideline for keeping speedometer error small.
How much will my speedometer be out if I fit 165/65R14 instead of 165/70R13?
Taking 165/70r13 vs 165/65r14 as the case in point: The error follows the diameter ratio, +1.6%. At an indicated 30 mph the true speed would be 30.5 mph, at 50 mph indicated it would be 50.8 mph, and at 70 mph indicated it would be 71.1 mph. The full table in both directions is in the speedometer section above.
Is 165/65R14 wider than 165/70R13, and does that matter?
Neither — 165/65R14 is 165 mm wide against 165 mm for 165/70R13, a difference of +0 mm. With the same width, grip differences come from the specific tyre rather than the size. Width also affects clearance, so check the arches and suspension at full lock.
Will 165/65R14 fit my car if 165/70R13 fits?
Not necessarily. 165/65R14 is taller by 8.9 mm and 0 mm the same width, and it needs a 14-inch rim. Check the wheel arches, suspension and steering lock at full lock in both directions, with the car loaded, and confirm the load index and speed rating against your door-jamb placard. A tyre professional can confirm fitment on your vehicle.
Which size is better, 165/70R13 or 165/65R14?
Neither is better in general — it depends on what you want. 165/65R14 has a -8.3 mm sidewall difference, a +0 mm width difference and a +1.6% diameter difference, so the trade-offs are comfort, grip and instrument accuracy respectively. If the diameter is within the plus-or-minus 3% guideline and the clearance check passes, the choice is a matter of preference; if not, resolve those two points first.