How to Find My Gear Ratio: Worked Example With the RPM Formula

If you want a straight answer on how to find my gear ratio, start with the formula: RPM equals speed times gear ratio times final drive times 336, divided by tyre diameter in inches. That one formula answers every gear-ratio question on this page — what RPM you will see at a given speed, what speed a given RPM means, and what ratio you need when the tyre size changes. This page works the formula step by step, gives RPM tables at 30, 50 and 70 mph, and explains what the numbers mean for acceleration, towing and cruising.

This is a calculation, not a safety approval. Always check your vehicle's door-jamb placard, load index and speed rating, and confirm fitment with a tyre professional before fitting a different tyre size.

how to find my gear ratio: The RPM formula

The formula is RPM = (speed × gear ratio × final drive × 336) ÷ tyre diameter (inches). Speed is in mph, the gear ratio is the transmission gear you are in (1.00 in direct drive, less than 1.00 in overdrive — for example 0.69 for a typical overdrive gear), the final drive is the axle ratio, and 336 is the constant that makes the units work. Rearranged, it gives speed: speed = (RPM × tyre diameter) ÷ (gear ratio × final drive × 336). The formula uses the tyre's nominal diameter, and all dimensions here are nominal (new-tyre) figures — real tyres vary slightly by brand, model, wear and inflation pressure. Use the diameter from the tyre-size chart for your size rather than guessing it from the sidewall: for example, a 265/75R16 measures 803.9 mm (31.65 in) in overall diameter. That is the point this page works through for how to find my gear ratio.

Worked example: RPM at 30, 50 and 70 mph for how to find my gear ratio

Taking how to find my gear ratio as the case in point: Take a 265/75R16 tyre with a nominal diameter of 803.9 mm (31.65 in) and a 3.73 axle ratio, in direct drive (gear ratio 1.00). At 70 mph, RPM = (70 × 1.00 × 3.73 × 336) ÷ 31.65 = 2,772. At 50 mph the same sum gives 1,980 RPM, and at 30 mph it gives 1,188 RPM. In overdrive — a 0.69 gear ratio, as an example — the 70 mph figure falls to 1,913 RPM, which is why motorway cruising feels relaxed in top gear. Change any one input and the answer moves in proportion: a bigger tyre lowers RPM, a higher ratio raises it, and a taller overdrive gear lowers it again.

how to find my gear ratio: RPM table: 30, 50 and 70 mph

For how to find my gear ratio, the point is this: RPM for a 3.73 axle ratio on a 265/75R16 tyre (31.65 in diameter). The direct-drive column uses a 1.00 gear ratio; the overdrive column uses 0.69 as an example.

Speed (mph) RPM in direct drive (1.00) RPM in overdrive (0.69)
30 1,188 820
50 1,980 1,366
70 2,772 1,913

Speed at fixed RPM for how to find my gear ratio

On this page, how to find my gear ratio is the case in point: Rearranged, the formula gives speed from RPM. With the same 3.73 ratio and 31.65-inch tyre, 2,000 RPM in direct drive means 50.5 mph, and 3,000 RPM means 75.8 mph. In overdrive the same 2,000 RPM means 73.2 mph. That is the quickest way to sanity-check a ratio you have found on an axle tag: drive at a steady speed in a known gear, note the RPM, and see whether the formula's answer matches the speedometer. If it does not, either the ratio is not what you thought, the tyre diameter is not what you assumed, or the speedometer itself is off — all three are worth checking before spending money on gears.

how to find my gear ratio: What the gear ratio changes

On this page, how to find my gear ratio is the case in point: The ratio sets where the engine lives. With a numerically higher ratio, such as 4.10 against 3.21, the engine turns faster at the same road speed and delivers more torque to the wheels — stronger acceleration, easier towing, more noise and usually more fuel on a motorway run. With a numerically lower ratio the engine turns slower, cruising is quieter and more economical, but the vehicle is lazier off the line and downshifts more on hills. A ratio that is too low for the tyre size is its own problem: the engine labours, the transmission hunts, and fuel use can rise rather than fall. Larger tyres have the same effect as a lower ratio, which is why the ratio is the usual correction after a tyre-size change. Judge the choice by the RPM at the speeds you actually drive, not by the size of the number.

Common mistakes for how to find my gear ratio

  • Taking how to find my gear ratio as the case in point: Ignoring the transmission's gear spacing. The axle ratio is only half the story: the transmission's own ratios decide how the gears step, and a wide-ratio gearbox can make a tall axle work where a close-ratio one would struggle.
  • For how to find my gear ratio, the point is this: Forgetting the transmission gear. The formula needs the gear you are actually in: 1.00 in direct drive, less than 1.00 in overdrive. Using 1.00 for a top-gear cruise overstates the RPM by roughly a third.
  • For how to find my gear ratio, the point is this: Judging a ratio by one speed only. A ratio that looks right at 70 mph can be wrong at 30 mph, so check the RPM at all three speeds in the table before deciding.
  • On this page, how to find my gear ratio is the case in point: Mixing up high and low ratios. A numerically higher ratio (4.10) is a 'lower' gear in driving terms — more torque, higher RPM — while a numerically lower ratio (3.21) is a 'higher' gear. The wording trips people up every time.

Related calculations for how to find my gear ratio

Taking how to find my gear ratio as the case in point: If this page answered your question, these pages take the next step — the same method applied to a closely related question, or the calculator that does the arithmetic for you.

how to find my gear ratio: Putting your figure to work

On this page, how to find my gear ratio is the case in point: The formula is the cheap part of the job, so use it first. Work out your RPM at real driving speeds with your tyre diameter from the chart and your axle ratio from the tag, and compare it with where the engine feels comfortable. If a change is needed, get a full quote — gears, labour and recalibration — and have a drivetrain specialist confirm the ratio before ordering. A ratio picked from a table without the RPM check is a guess, and guesses in gearing are expensive to undo.

Frequently asked questions

How do I calculate RPM from gear ratio?

For how to find my gear ratio, the point is this: Use RPM = (speed × gear ratio × final drive × 336) ÷ tyre diameter in inches. Speed is in mph, the gear ratio is the transmission gear (1.00 in direct drive), the final drive is the axle ratio, and the tyre diameter comes from the size chart — for a 265/75R16 it is 31.65 inches.

Do I need to recalibrate the speedometer after a gear change for how to find my gear ratio?

Yes. The speedometer, odometer and shift points depend on the ratio and tyre size, so changing gears without recalibration leaves every reading wrong. Recalibration is usually done with a programmer or by a dealer, depending on the vehicle. That is the point this page works through for how to find my gear ratio.

What is the difference between gear ratio and final drive ratio for how to find my gear ratio?

On this page, how to find my gear ratio is the case in point: They are the same idea at different places. The gear ratio is the transmission gear you are in; the final drive ratio is the axle ratio. The formula multiplies them together, so the total reduction from engine to wheels is the product of the two.

What happens if my gear ratio is too low?

The engine feels gutless, the transmission hunts between gears on hills, and acceleration from a standstill is sluggish — especially with bigger tyres. The fix is usually a numerically higher ratio, fitted by a drivetrain specialist with the speedometer recalibrated afterwards. That is the point this page works through for how to find my gear ratio.

Does a higher gear ratio mean faster acceleration?

In general, yes: a numerically higher ratio gives more torque at the wheels and quicker acceleration, at the cost of higher cruising RPM and usually more fuel use on the motorway. A numerically lower ratio gives relaxed cruising but less pull off the line. That is the point this page works through for how to find my gear ratio.